Focused arrival windows
Useful updates and clear arrival timing.
Every slab leak is different, so we carry the tools to match the diagnosis: acoustic listening gear, infrared cameras, electronic leak detection wands, and video pipe inspection cameras. If you need slab leak detection near me Venice homeowners can actually reach, our crew covers the full range from a single pinhole to a whole-house repipe.
Useful updates and clear arrival timing.
Review the approach and price before deciding.
Equipped vehicles and respectful cleanup.
Neighbors serving neighbors with follow-through.
Every slab leak is different, so we carry the tools to match the diagnosis: acoustic listening gear, infrared cameras, electronic leak detection wands, and video pipe inspection cameras. If you need slab leak detection near me Venice homeowners can actually reach, our crew covers the full range from a single pinhole to a whole-house repipe.

We pinpoint under-slab water leaks using acoustic microphones, a moisture meter, and pressure testing before any concrete is opened. This is the first step for any Venice home with a rising water bill or a hot spot on the floor.
View service
Water coming through the slab at 2 a.m. gets a real response. We shut down the affected line, stop the water, and make the repair so your Venice home is not sitting in standing water overnight.
View service
We open a small access point, repair the failed copper, PEX, or CPVC pipe, and backfill with a proper concrete patch. Most under-slab repairs in Venice are finished in a single day.
View service
Before we cut, we locate. A pipe locator and electronic leak detection wand narrow the break to a few inches, which keeps the concrete saw work small and your flooring damage minimal.
View service
Thermal imaging and acoustic listening let us find many leaks without breaking the slab at all. If the line can be rerouted overhead or through the attic, you skip concrete work entirely.
View service
We pressurize the line and listen with a Sewerin acoustic microphone. The sound of water escaping under pressure tells us exactly where the pipe has failed, even under tile and thinset.
View service
A FLIR infrared camera shows the temperature difference where warm supply water is escaping into cool concrete. It is the fastest way to map a leak path across a Venice slab floor.
View service
Infrared scanning reads the thermal signature of a hidden leak without touching your floors. We use it alongside pressure testing to confirm the leak is under the slab and not in a wall.
View service
An electronic leak detection wand picks up the sound and vibration of escaping water through concrete. It works on copper, PEX, and CPVC lines and is safe for occupied homes.
View service
Warm spots on the floor, a water bill that jumped $80 or more, the sound of running water with everything off, cracks in tile, or a musty smell near baseboards. Any one of these is worth a call.
View service
If your usage doubled and nothing changed, an underground water leak is the usual suspect. We meter-test the house, isolate the slab loop, and confirm the loss before quoting a repair.
View service
A warm patch on a Venice floor almost always means a hot-water line is leaking under the slab. We trace the warm zone with infrared, then confirm with pressure testing on the hot side.
View service
Water under a foundation erodes soil and stresses the slab. We stop the leak, dry the area, and repair the line so your foundation is not sitting on saturated ground.
View service
We cut a clean access opening with a concrete saw, repair the pipe, and patch the slab to match. Most openings are under 2 square feet when the leak is properly located first.
View service
When a line is too corroded to patch, we reroute it overhead through the attic or walls. You keep your slab intact and get a new line with a full warranty.
View service
We replace the failed section with new copper or Uponor PEX and SharkBite or NIBCO fittings, then pressure-test at working pressure before closing the slab.
View service
Supply, drain, or irrigation line, we isolate which one is losing water. A pressure testing gauge on each zone tells us in minutes where the loss is coming from.
View service
From the meter to the house and under the slab, we repair underground leaks with code-correct materials that meet the Florida Building Code and Uniform Plumbing Code.
View service
Copper under a Venice slab corrodes from the outside in, especially in older homes. We repair the pinhole or replace the run, depending on how much wall thickness is left.
View service
PEX rarely fails, but fittings and crimp rings do. We cut out the bad connection, install new Uponor or SharkBite fittings, and pressure-test the repair.
View service
CPVC gets brittle with age and cracks at joints under slab stress. We replace the cracked section and support the new pipe so it is not resting on raw concrete.
View service
When a slab has leaked three or four times, repiping is cheaper than chasing breaks. We run new PEX overhead and abandon the old under-slab lines in place.
View service
Single-family homes, condos, and villas across Venice. We work clean, protect your flooring, and haul away debris so you are not left with a construction site.
View service
Retail, office, and restaurant slabs in Downtown Venice and East Venice. We schedule around your business hours and work nights when the leak cannot wait.
View service
We isolate the slab loop, charge it to working pressure, and watch the gauge. A steady drop confirms the leak and tells us whether it is on the hot or cold side.
View service
A moisture meter maps how far water has traveled through the slab and into baseboards. That tells us how much drying is needed after the repair is done.
View service
Where the pipe run allows, we use trenchless pipe lining equipment and epoxy pipe lining to seal the leak from the inside, with no concrete removal at all.
View service
Venice homes from the 1960s through the 1990s often have original copper under the slab. We know where these lines run and how they fail, which shortens the diagnosis.
View serviceWe shut off fixtures, watch the meter, and pressure-test the slab loop. In about 30 minutes you know whether the loss is under the concrete or somewhere else in the house.
Acoustic listening and infrared scanning narrow the leak to a few inches. We mark the spot on the floor so you see exactly where the access will be.
We cut a small opening with a concrete saw, repair the pipe with new fittings, or reroute the line overhead if the run is too far gone. Most repairs finish the same day.
The line is charged to working pressure and held while we watch the gauge. Once it holds, we patch the slab with concrete, clean up, and walk you through the repair.
Four steps, no guesswork. We confirm the leak is under the slab, locate it, fix it, and prove the fix with a pressure test before we pack up the truck.
We are a licensed, insured, and bonded plumbing contractor working Sarasota County every day. Our trucks carry RIDGID and Milwaukee diagnostic gear, so the leak gets found on the first visit instead of the third.
Acoustic microphones, a FLIR infrared camera, and pressure testing gauges narrow every leak to within a few inches. That is why most of our slab openings stay under 2 square feet instead of a trench across the room.
Call (941) 477-1483 and we roll a truck the same day in most of Venice. Emergency calls after hours get a live person, a shutoff walk-through, and a tech dispatched for the repair.
Every repair meets the Uniform Plumbing Code and Florida Building Code, and we pressure-test the line before we close the slab. Our workmanship carries a written warranty, and our plumbers hold state licensing and OSHA safety certification.
The right company is the one that locates the leak before cutting and pressure-tests the repair before leaving. We do both on every job, using acoustic and thermal equipment, and we are a state-licensed plumbing contractor working Sarasota County daily. Call (941) 477-1483 and we will confirm the leak is under the slab before you commit to anything.
Most single-point slab repairs in Venice run $850-$1,800 in 2026, and locating the leak first is $225-$375. A full reroute or repipe runs $2,400-$6,500 depending on how far the line has to travel. You get a written price before we cut, and the diagnostic fee is credited toward the repair.
Leak detection in Venice runs $225-$375 flat, and that covers acoustic listening, infrared scanning, and a pressure test on the slab loop. If we find the leak and you approve the repair, we credit that fee toward the job. No leak found, no repair needed, you still get the written findings.
Yes. We answer emergency calls around the clock and dispatch for active water loss, usually within a couple of hours in the Venice area. After hours we walk you through shutting off the main so the damage stops while a tech is on the way. Call (941) 477-1483 any time.
Ask three things: do they locate the leak with acoustic or thermal gear before cutting, do they pressure-test the repair, and are they a licensed Florida plumbing contractor. We do all three, carry RIDGID and Milwaukee diagnostic tools, and warranty our workmanship. That is the standard any Venice homeowner should hold a slab leak pro to.
The questions we get on the phone most often, answered straight.
Ask the local teamReach us at (941) 477-1483 or info@veniceslabguard.com and we will get a tech on your leak. We answer 24/7 for active water loss and schedule standard inspections Monday through Friday, 8:00 a.m. to 6:00 p.m. Same-day appointments are common across Venice and Sarasota County.